Staticide
Ultra ESD Floor Finish
Staticide® Ultra is the most economical product on the ACL product
line. It dries faster and with higher gloss intensity than other leading
ESD floor finishes. In addition, it also provides
superior abrasion performance that lasts up to 18 months with no buffing
required.
1500-2000 sq feet per gal.
#4600 4 units per case ........
That's less than $80 /gal when purchased by the case
4
units per case / 38 lbs.
|
Anti-Static Acrylic Floor Stripper
This non-ammoniated, biodegradable floor stripper removes old coats of wax or synthetic floor finish quickly and effectively with no harsh odors. This stripper will not damage or dull flooring when used according to manufacturer's directions. Floor Stripper removes coats of wax or synthetic floor finishes quickly and
effectively. Non-ammoniated , biodegradable, no harsh
odors, non-streaking and low foaming. Effective in hard or soft water.
* Removes embedded dirt providing a completely clean and finish-ready
surface by emulsifying dirt and residual particles of old wax or
coating.
* Meets or exceeds MIL-B81705B, NFPA 56A
* Coverage approximately 5000 sq. ft. per diluted gallon (diluted 1 to 15 parts water)
Available in concentrate form only:
4010-4 /4 gallons per case . . .. . . $94.00/case
That's only 19.70
/gal when you buy a case.
| Staticide® Ultra 2 Floor finish. Incorporates a static control component in the acrylic molecule itself.
Specialty formulated for use on dissipative tiles. No other floor
finish can satisfy those stringent standards so effectively. Features Ease of black mark removal High gloss UV resistance Electrical conductivity on static dissipative tiles. 1500-2000 sq feet per gal. 4 units per case / 38 lbs. $295.00 / Case
|
Anti-Static Neutralizer / Cleaner
A highly concentrated, low-foaming biodegradable, anti-static cleaner for use in all facilities.
It leaves no film, constant detergency and safe for septic and sewage systems.
4020 will not degrade the anti-static properties of floor finishes.
* Coverage approximately 10,000 sq. ft. per diluted gallon.
(diluted 1 part to 128 parts water)
Available in concentrate only:
4020-4 (4 gallons per case) . . .$132
/ case
|
Staticide Zero V.O.C. Floor Finish
4000-1 Acrylic Floor Finish (Gallons) Staticide® Acrylic offers these remarkable properties: · Low volatile organic compound (VOC) content · High resistance to abrasion · Durable, non-slip formulation · Controls static generation even at low humidities · Resists powdering and discoloration · Zero formaldehyde · Versatile, self-leveling application 4 units per case / 38 lbs. Available in clean room packaging; double bagged (Available in gallons only) 1500-2000 sq feet per gal. # 4200-1CRP- 4 gallons per case. $266.20/ Case
| Staticide® Acrylic Floor Finish Cutting-edge technology assures Staticide® Acrylic's superior performance on any sealed or hard floor surface, including sealed concrete, marble, wood, terrazzo, solid vinyl, vinyl asbestos and asphalt tile. Low volatile organic compound (VOC) content High resistance to abrasion Durable, non-slip formulation Controls static generation even at low humidity Resists powdering and discoloration Zero formaldehyde Versatile, self-leveling application 1500-2000 sq feet per gal.
|