FloorCad - Extreme Wear Coatings

Floor Coating

FloorCad

Protection in the path of extreme mechanical abuse

Superior Compressive Strength with 2 times the load-carrying capacity of uncoated concrete

FlorClad 1/4-inch, heavy-duty floor topping provides excellent protection and appearance in environments exposed to severe physical abuse but moderate exposure to chemicals. This long lasting, easy-to-maintain monolithic floor system is used to resurface spalled concrete deteriorated by mechanical abuse and in new construction to prevent rapid physical deterioration of concrete floors.

Designed to meet a wide variety of industrial flooring needs where abrasion and impact resistance is required, the FlorClad System withstands the most severe traffic and has two to three times the load-carrying capacity of concrete. Foot traffic can resume within 8 to 10 hours of application, and full-service within 24 hours. The FlorClad System is 100 percent solids and suitable for food and beverage facilities, warehouses, traffic aisles, loading docks and many other environments.

FlorClad is easy to apply, resulting in lower labor costs, and provide long wear that will reduce recoating costs. It is VOC-compliant for use in all regulated areas.

Compressive Strength                                             (ASTM C 579) 10,000 psi
Flexural Strength                                                    (ASTM C 580) 3,150 psi
Modulus of Elasticity                                               (ASTM C 580) 5.0 x 105 psi
Tensile Strength                                                      (ASTM C 307) 2,000 psi
Bond Strength to Concrete (ASTM D 307) Exceeds tensile strength of concrete (Concrete fails first)
Taber Abrasion                                                       (ASTM D 4060 CS 17 wheels) Loss/1000 cycles=30 mg
Water Absorption                                                    (ASTM C 413) 0.10% maximum
Linear Shrinkage                                                     (ASTM C 531) 0.05% maximum
Linear Coefficient of Thermal Expansion                    (ASTM C 531) 3.4 x 10-5 in/in/°F
Flammability                                                           (ASTM D 635) Self Extinguishing
Impact Resistance                                                  (Mil-D-3134J) Satisfactory per ¶ 3.15
Coefficient of Friction                                               (ASTM D 2047) 0.6 minimum
Hardness, Shore D                                                  (ASTM D 2240) 85


	Maintenance: UltraPlex EC/ESD is nonporous and of extreme high density. It resists gritting and traffic soil, will not support bacterial growth, will not hold odors and is easily mopped clean. Will not dust. ULTRAPLEX E-100 ESD is nonporous. It is easily mopped clean or hosed.

[ Home ] [ Hand Soldering Tools ] [ Hand Tools ] [ Static Control ] [ Materials Handling ] [ Flooring ] [ Auditing Equipment ] [ Spring Probe-Pogo Pin ] [ Ceramic Tools ] [ About Us ]

salesATrdmoneyDOTcom

This site will give you information on the specific products and services offered by RDMC. It is our goal to provide general information on the items present. Detail information will be provided upon request.